可靠性测试
                     可靠性测试
                序号
                测试项目
                测试条件
                设备
                1
                冷热循环
                Ta = -55 (+0 ℃- 10 ℃)  40min
                Ta = ROOM TEMP  10min
                Ta = + 150 (+15 ℃ - 0 ℃) 40min
                Ta = ROOM TEMP  30min
                FOR 0 CYCLE / 10 CYCLES / 500 CYCLES / 1000 CYCLES
                tct
                2
                高温存储寿命
                Ta = 170 ± 5 ℃
                TESTING TIME
                0HRS / 168HRS / 500HR / 1000HRS
                htsl
                3
                高温反偏
                Ta = 170 / 150 / 125 / 100 ± 5 ℃ (BY PRODUCT)
                V = 0.8 × VR
                TESTING TIME:
                0HR / 24HRS / 48HRS / 96HRS / 168HRS / 500HRS / 1000HRS
                htrb
                4
                连续性正向操作寿命
                Ta = 55 ℃
                POWER 60HZ
                I = Io ± 10%
                TESTING TIME : 0HR / 168HRS / 500HR / 1000HRS
                cfol
                5
                冷热冲击
                HOT Ta =100 ℃  t = 10min
                COLD Ta = 0 ℃  t = 10min
                20 CYCLES
                TIME BETWEEN TRANSFERRING
                DO NOT EXCEED 10 SECONDS
                tst
                6
                高温蒸煮
                Ta = 121 ℃
                P = 1.2 kg / cm2
                TIME:0HRS/24HRS/48HRS/96HRS
                ptc
                7
                间接性正向操作寿命
                POWER 60HZ
                I = Io*1.5
                POWER ON;10 SEC
                POWER OFF;17SEC
                TESTING TIME:0 CYCLES/5000 CYCLES/1000 CYCLES
                ifol
                8
                顺向瞬间电流
                SQ WAVE OR SIN WAVE
                IFSM = DATA SHEET SPEC.
                TIME : 8.3msec,T = 1 CYCLE
                fsc
                9
                高温高湿
                Ta = 85 ℃
                RH = 85%
                TESTING TIME :168HRS / 500HRS
                hum
                10
                耐焊热
                TEMPERATURE OF SOLDER
                POT = 260 ± 5℃
                TIME FOR DIPPING
                IN SOLDER =10 ( +1 - 0 )SEC, 2 TIMES, 3 TIMES
                DIPPING DEPTH = 1 - 1.5 mm
                BELOW BODY FOR ONE CYCLE
                sh
                11
                高温逆向电流
                Ta = 170 ± 5 ℃,150 ± 5 ℃,125 ± 5℃,100 ± 5 ℃
                ( BY PRODUCT )
                V=VR
                htir
                12
                焊接性
                TEMP. OF SOLDER POT = 235 ±5 ℃
                TIME FOR  DIPPING FLUX = 5-10 SEC
                TIME FOR DIPPING IN SOLDER = 5+/- 0.5SEC
                0.05 INCH MAX. FROM THE BODY
                FOR ONE CYCLE
                st
                Copyright © 2010 All Rights Reserved 上海贯翼电子有限公司 版权所有  沪ICP备01045850号
                电话:021-34099378  传真:021-34099379  E-mail:gysemi@126.com
                网站建设酷创动力
                幸运彩票登录网址